Free Energy

What is free Energy?

There are those who would ask what is free energy and rightfully so. If you were to google free energy it would return 1520000000 results. If you type “working free energy devices” about 62600000000 and that is something but if you ask what is free energy it is energy that is created without the need for input of fuel such as solar or wind.  Kapanadze created a solid state device that has been proven but will not release the plans which is sad as it denies everyone from adding or building that device and he will die broke unremembered in the world. I have found a method of creating free energy that I am releasing to the world as long as they credit me with the discovery. It can be built by anyone in any part of the world without fear of reprisal or coercion. I will be working on  explaining it to all and am currently building the production model and plans.

The concept and theory of The MIST Power Cell:

You may ask what is the MIST power cell and rightfully so. The  Magnetically Isolated Steel Torrid is the cornerstone of this technology as it create an unique magnetic flux path for our new driver circuit to follow. The following circuit create more power out than in therefore it makes energy. The secret is in the bi-filler coil and the unique way of driving them. I would imagine any core type would work (some better than others) the truth is that the magnetic flux around the coil is 95% higher than any know to exist.  The gain comes from two things 1. better inducement of current from the primary coil to the secondary coil 2.  higher frequency driving the coils and if you read Tesla paper you would know that he made a lot of comments of higher frequencies. The core defines the frequency of the driver as to the coil it is a small diameter wire wound first then a gauge double the gauge on top twice where you will have three coils. The primary coils polarity is reversed as the current flow is reversed. The voltage drop accost the bi-polar transistor about 0.7 v dc that is the unequal potential that Tesla talked about.  By coupling this with the bifilar  coil wound at each end but separate from the main coils. We get a huge voltage increase with the gain coming from the increased current transfer.


Let us talk about the different parts of this circuit.

The coil uses an unique core that is magnetically isolated steel torrid. Think about that for a moment instead of a single steel core or a ferrite  core it has about thirty or so, and by using welding rod the flux on the rod does not have magnetic type properties.

The next part is about bifilar wingdings of which there are three types 1. is the pancake type Tesla talked about then he said you could also use a 2. helical wound with wire next to wire (side by side) then there is type 3. he talks about which is helical wound one on top of the other.  For our purposes we will use type three but type two will work maybe with ferrite core do not have any to work with so I use type three over a steel torrid core with the bifilar coil we take and hook it to the new driver circuit. You also need to remember that I want something that anyone can build with junk parts.

The circuit takes and turns on one coil which in turn produces a reverse current in the output coil thus turning off the first coil driver and turning on the secondary coil driver  I place 12 volts at the input side of the circuit one transistor is always one which causes current to build in the coil where one is  at supply volts and the other coil has a reverse current flow as I say the magnetic field in the core rises and induces a reverse voltage into the secondary coil until it reaches the trigger point of the circuit and flips the other transistor on at which point there is switch of 0.7 volts from one coil to the other. this process repeats it’s self until the end of time of something burns up. test reveal that 12 volts at 18 mA output 70 volts at 18 mA a six times increase which in it’s self would be good but as I found out 170 volts on the output I still had only 25  mA on the input using, but by using  a bifilar wound coil on the secondary separate from the first secondary coil wound next to it with no primary coil on top of it as a helical side by side wound even without being connected to the other coil you can derive the same voltage from that coil with just one leg it will supply the same on the output with a lower input current.

So let us summarize Pin = 12.65 at 25 mA (0.31265 watts) Pout = 70 volts at 20 mA  (1.4 watts)  I do believe that the voltage will scale very well and that much higher currents in the secondary are available as they are approximately the same there is a huge gain in the voltage where voltage out does not matter  .  Understanding that  what we have done is not create power simply equal currents in another coil as found here there are a lot of examples of this being done and that my friends is how it is done but I will post videos and photos as I build a production prototype unit that anyone can build. Here is the theory of operation you build a magnetic field in the first primary coil and it induces an opposite voltage in the secondary coil that turns off the driving transistor at that moment. The magnetic field then collapses at the same time the other transistor turns the other primary coil which is reversed from the first coil so it increases the reverse magnetic field in the first primary coil and the voltage on the secondary coil at which point it repeats until the unit is turned off. I found the the resonance of the coils can be set by placing ceramic disk capacitors across the primary coils. It makes a class C amplifier but with a push in the field collapse from the other coils standpoint.  Both coils are out of sync with each other and the loss of sync creates larger magnetic fields which creates larger inducement of current to the secondary coil.

So let us start:

To start we must make the core that uses 1/8″ 6011 welding rods  with most if not all the flux attached over a 1/2″ copper tube two layers of rods then PVC electric tape over the top. From there we take and  we start our secondary winding 2 wires #20 ga. or whatever size remembering that it has to handle the current desired, that is enamel coated copper wound side by side around the core and wind them clockwise 13″ long  one end to the other. Then we take #12 or #14 ga. wire and wind two coils both clockwise one on top of the other we should then have 8 wire ends on “three” coils note that this is two are bifilar coils both of which are described by Dr. N. Tesla.

coil design

We see from the above diagram that there are three layers of wire with eight ends so that each coil has a separate feed. This is almost like the test coil I constructed that gave the initial OU results. What I surmise is that this new coil will yield far greater results as I said Iout = 93% of Iin but the voltage does not matter so that is where the power gain in watts comes from also remember that this device radiates energy as a test circuit (the dual LED resistor  pair) lite up just by setting it next to the coil up to 3″ to 5″ away as well as if it were hooked up to the source supply so the first video will be on the core as even with the LaserHacker circuit it did that.So to sustain the circuit we will  adjust the Output Voltage > Source Voltage(Input Voltage) + Load Voltage. So say we supply the circuit with 12 volts DC and we want to charge a 12 volt battery then we would need 12+12+(4 or 5) which would equal 29 to  30 volts DC at the coil and remember that  it is High Frequency so using a full wave rectifier we do not need a large capacitor filter the output. So my prediction on the output is we put 12.5 volts in, and we then regulate it to say 11 volts then we can supply the filter cap at 15 or so volts as it gets reduced to 11 volts in the end and it stops the runaway syndrome I found. If you supply the input circuit with the the “same” it will never be the “same” as it will do one of two things 1. Increase the output as the input increases or 2. Decrease the output until the circuit reaches about 1 volt or so, but if you just want to test it then use 12 volts dc or so with current meter inline and then use full wave bridge rectifier on the output with a filter capacitor and current meter inline with load. This is to test the circuit after which you can make it self sustaining. You then only have to take from the output coil and place a AC/DC switching supply and attach to the input to the output coil (they first turn the AC to high voltage DC) so that the circuit has a power source to feed it. The voltage on the output can not exceed 220 VAC as it will kill the switching supply. Note that a lot of laptop power supplies are switching supplies simply add a voltage regulator to the supply output so it remains constant.


This entry was posted in real power, Solutions. Bookmark the permalink.

Leave a Reply

Please log in using one of these methods to post your comment: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s